44

MaMa Whistle Rotation

This rotation is not developed by a human… I’ll stop here. It is heavily RNG-reliant, but can produce stellar results with low stats. Special thanks to SomeoneNice on the balance discord!

Video demonstration here.

CROSS-CLASS:

OPENER:

If you’re lucky you’ll get IQ5. This is the desired opener. If your first or second Patient Touch fails, do a third Patient Touch. Otherwise, jump straight to Flawless Synthesis.

If you see a ToT proc, always take it no matter when you see it. If two ToTs proc in the opener SH2 phase, then use only one Patient Touch. It’s fine.

When your Whistle stack decreases to 9, always use Satisfaction.

After the opener, if you have Inner Quiet 1 or 2, then proceed to use Steady Hand II + Patient Touch until you reach at least 4, using Master’s Mend II if needed.

FLAWLESS SYNTHESIS PHASE

Next would be the Flawless Synthesis phase:

During this phase, before Maker’s Mark wears off, prioritize the following:

1. If Condition is Good / Excellent -> Tricks of the Trade
2. If Whistle Stack is at 3, 6, or 9 -> Satisfaction
3. Refresh Comfort Zone
4. If durability is at 10 -> Master’s Mend II
5. If Whistle Stack is equal to Inner Quiet Stack -> Trained Hand

1. If Whistle While you Work is at 2 stacks -> Nymeia’s Wheel
2. If Whistle While you Work depletes before Maker’s Mark is at 10 ~ 20 stacks -> Whistle While you Work

If you overflow on CP, you have two options:

1. Ignore the CP overflow
2. Use Steady Hand II + Hasty Touches to deplete the CP at the cost of ~200 progress

I recommend the latter.

INNER QUIET PHASE:

Once we deplete our Maker’s Mark stacks, our focus would be to increase Inner Quiet stacks.

Check your remaining progress first. If you need 2~3 Ingenuity-buffed CS2’s to complete the craft, then be sure to use one to two during this phase. Otherwise, if you only need 1, then you do not need to use any during this phase.

We lead on with Steady Hand 2, and proceed to use Hasty Touch.

Once we hit 11 stacks of Inner Quiet, we proceed to use as many Ingenuity-buffed Hasty Touches as possible, while making sure we use any needed Careful 2 / Careful 3 within the Ingenuity window.

Follow this priority list. This priority list is a rough guide and you can change as you see fit, but make sure to always leave enough CP left for the finisher.

1. Ensure you have enough CP and durability for the finisher. This is 144 CP and 20 durability.
2. If Condition is Good, use Tricks of the Trade. If Excellent, use Precise Touch if SH2 is active.
3. Use Nymeia’s Wheel if Whistle reaches 2 stacks. If durability is above 40, then continue using Hasty Touches until durability reaches 40. Use Nymeia’s Wheel immediately if Condition is Good/Excellent and Whistle is at 1 stack unless Finishing Touches will not complete the craft.
4. If Whistle Stack is at 3, 6, or 9 -> Satisfaction
5. If durability is at 10 and CP is above 320 -> Master’s Mend II
6. If durability is at 30 ~ 50 and CP is above 275 -> Manipulation II
7. If Inner Quiet is at 11 stacks -> Ingenuity I
8. Use one Careful Synthesis II during the Ingenuity window if you need to.

FINISHER

If you have extra CP, change Ingenuity to Ingenuity II.

If you accidentally used up too much CP, skip, in order of priority:

1. Innovation
2. Prudent Touch
3. Byregot’s Blessing (use Byregot’s Miracle)